|
|
Build Your Online Product Catalogs?
| Product Name: |
MF2K Solid Colors
|
| Supply Ability: |
|
| Related proudcts |
goodsif series, |
| Specifications |
GOODSIF Series |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Product Name/Model：MF2K Solid Colors
Characteristic：MF2K Solid Colors, high gloss and build, good performance of leveling property,easy construction, excellent pretective and coveraging power, long lasting bright color. Mainly applies to intermediate cars, MPV and bus.
Substrates Well-Sanded, Completely dried and good existing finishes as bellow:
A original paint B. Old paint firm C. 1K or 2k primer
Surface
Cleaning Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding
with P800-P1000, wash with clean water then keep dry; again with degreaser.
Mixing
Ratio MF2K Solid Colors Hardener Thinner
2 1 0.2-0.4
��?5��?MF2K Solid Colors MF281 Fast Hardener 60 Fast Thinner
15-30��?MF2K Solid Colors MF282 Standard Hardener 61 Standard Thinner
��?0��?MF2K Solid Colors MF283 Slow Hardener 62 Slow Thinner
Spray
Viscosity 16-19s to drop off, in 4# viscosity cup, at 25°C,
Pot-life At 25°C
2 hours with fast hardener.
4 hours with standard or slow hardener.
Re-Treatment There are particles or runs after spray, sand affected area with P2000 sand paper after
thorough drying, then polish to solve the problem.
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 3-5kg/cm ²
Suction Feed: 1.4-1.6mm 3-5kg/cm²
Spray Technology Coats&Thickness: 2-3 coats, total 35-50um
Flash-Off Time: At 25°C, 5-10 minutes between two coats,
Air-Drying Time: Allow 10-15 minutes air drying time before force drying
Temperature Dust Free Tack Free Dry To Handle Dry To Test
+25°C 40 minutes 2 hours 9 hours 6 Days
+70°C 5 minutes 10 minutes 25 minutes 50 Minutes
Shelf Life 2 years in original sealed can, cool and dry place at 25��?
Package 1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30��? add appropriate Retarder Solvent into thinner to avoid blushing. For more ***ails, please refer to technical data sheet of Retard |
| Company: |
Guangzhou Zhenroumei Chemical Coatings Limited
|
| Contact: |
Ms. Qiqin Huang |
| Address: |
No. 16, industrial Avenue Shihai |
| Postcode: |
510970 |
| Tel: |
86-020-87833698 |
| Fax: |
86-020-87833698 |
| E-mail: |
|
|
|
|
Home
