86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


Guangzhou Zhenroumei Chemical Coatings Limited

Products >> MF1K Pearl Colors

MF1K Pearl Colors

Build Your Online Product Catalogs?



Description
Product Name: MF1K Pearl Colors
Supply Ability:
Related proudcts goodsif series,
Specifications GOODSIF Series
Price Term:
Port of loading:
Minimum Order
Unit Price:

Product Name/Model:MF1K Pearl Colors

Characteristic:MF1K Pearl Colors with excellent leveling property,easy construction,excellent adhesion power and coveraging power,can match all kinds of solid colors, metallic and pearl effect. Mainly applies to intermediate cars, MPV and bus.
Substrates Well-Sanded, Completely dried and good existing finishes as bellow:
A original paint B. Old paint firm C. 1K or2k primer
Surface Cleaning Wash by warm soap, remove wax, silicon and other contaminations with
degreaser, sanding with P800-P1000, wash with clean water then keep dry;
again with degreaser.
Mixing Ratio MF1K Pearl Colors Thinner
1 1
��?5��?MF1K Pearl Colors 60 Fast Thinner
15-30��?MF1K Pearl Colors 61 Standard Thinner
��?0��?MF1K Pearl Colors 62 Slow Thinner
Spray Viscosity 14-16s to drop off, in 4# viscosity cup at 25°C,
ReTreatment After spray, allow 10-20 minutes air-drying time,then spray clear coat at once.
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 3-5kg/cm²
Suction Feed: 1.4-1.6mm 3-5kg/cm²
Spray Technology Coats&Thickness: 2-3 coats, total 15-20um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on
temperature and paint film.
Shelf Life 2 years in original sealed can, cool and dry place at 25��?
Package 1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30��? add appropriate Retarder Solvent into thinner to avoid blushing. For more ***ails, please refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.

Contact Us
Company: Guangzhou Zhenroumei Chemical Coatings Limited
Contact: Ms. Qiqin Huang
Address: No. 16, industrial Avenue Shihai
Postcode: 510970
Tel: 86-020-87833698
Fax: 86-020-87833698
E-mail:         


Copyright© Guangzhou Zhenroumei Chemical Coatings Limited All Rights Reserved.
Tel : 86-020-87833698 Fax : 86-020-87833698
Powered by 86exporter.com