|
|
Build Your Online Product Catalogs?
| Product Name: |
DG2K-Solid Colors
|
| Supply Ability: |
|
| Related proudcts |
marside series, |
| Specifications |
MARSIDE Series |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Product Name/Model：DG2K-Solid Colors
Characteristic：DG2K Solid Colors, high gloss and build, good performance of leveling property,easy construction, excellent pretective and coveraging power, long lasting bright color.Mainly applies to intermediate cars, MPV and bus.
Substrates Well-Sanded, Completely dried and good existing finishes as bellow:
A original paint B. Old paint firm C. 1K or 2k primer
Surface Cleaning Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding
with P800-P1000, wash with clean water then keep dry; again with degreaser.
Mixing Ratio DG2K Solid Colors Hardener Thinner
2 1 0.2-0.4
��?5��?DG2K Solid Colors MSH1021 Fast Hardener 90 Fast Thinner
15-30��?DG2K Solid Colors MSH1020 Standard Hardener 91 Standard Thinner
��?0��?DG2K Solid Colors MSH1022 Slow Hardener 92 Slow Thinner
Spray Viscosity 16-19s to drop off, in 4# viscosity cup, at 25°C,
Pot-life At 25°C
2 hours with fast hardener.
4 hours with standard or slow hardener.
ReTreatment There are particles or runs after spray, sand affected area with P2000 sand paper after
thorough drying, then polish to solve the problem.
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 3-5kg/cm 2
Suction Feed: 1.4-1.6mm 3-5kg/cm 2
Spray Technology Coats&Thickness: 2-3 coats, total 35-50um
Flash-Off Time: At 25°C, 5-10 minutes between two coats,
Air-Drying Time: Allow 10-15 minutes air drying time before force drying
Drying Time Temperature Dust Free Tack Free Dry To Handle Dry To Test
+25°C 40 minutes 2 hours 9 hours 6 Days
+70°C 5 minutes 10 minutes 25 minutes 50 Minutes
Shelf Life 2 years in original sealed can, cool and dry place at 25��?
Package 1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30��? add appropriate Retarder Solvent into thinner to
avoid blushing. For more ***ails, please refer to technical data sheet of Re |
| Company: |
Guangzhou Zhenroumei Chemical Coatings Limited
|
| Contact: |
Ms. Qiqin Huang |
| Address: |
No. 16, industrial Avenue Shihai |
| Postcode: |
510970 |
| Tel: |
86-020-87833698 |
| Fax: |
86-020-87833698 |
| E-mail: |
|
|
|
|
Home
