|
|
Build Your Online Product Catalogs?
| Product Name: |
BYTF606-2K Primer Surfacer
|
| Supply Ability: |
|
| Related proudcts |
boyet series, |
| Specifications |
BOYET Series |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
BOYET Series
Product Name/Model：BYTF606-2K Primer Surfacer
Characteristic: Multi-purpose two-component 2K Primer Surfacer with strong filling power and
fine adhesion between coats, fast drying time, easy sanded.
Substrates Dried and sanded existing finishes, all kinds of primer and putty.
Surface Cleaning Wash by warm soap, remove wax, silicon and other contaminations with degreaser,
sanding with P800-P1000, wash with clean water then keep dry; again with degreaser.
Mixing Ratio BYTF606-2K Primer Surfacer BYTH106 2K Primer Hardener  Thinner
4 1 1-1.5
�5℃�BYTF606 2K Primer Surfacer BYTH106 2K Primer Hardener BYTX-1 Fast Thinner
15-30�BYTF606 2K Primer Surfacer BYTH106 2K Primer Hardener BYTX-2 Standard Thinner
�0�BYTF606 2K Primer Surfacer BYTH106 2K Primer Hardener BYTX-3 Slow Thinner
Pot-Life At 20°C, 3 hours mixed with hardener, thinner
Spray Viscosity 14-16s to drop off, in 4# viscosity cup at 25°C,
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm 2
Suction Feed: 1.4-1.6mm 4-5kg/cm 2
Spray Technology Coats&Thickness: 2-3 coats, total 20-30um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats,it depends on temperature and
paint film.
Drying Time A. Allow 10-20 minutes air-drying,then 60°C baking 20 minutes, can sand after cool down.
B. Air-drying time 3 hours, at 20°C.
Shelf Life 2 years in original sealed can, cool and dry place at 25â„?
Package 1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30â„? add appropriate Retarder Solvent into thinner to
avoid blushing. For more ***ails, please refer to technical data sheet of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore for future use;
clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry. |
| Company: |
Guangzhou Zhenroumei Chemical Coatings Limited
|
| Contact: |
Ms. Qiqin Huang |
| Address: |
No. 16, industrial Avenue Shihai |
| Postcode: |
510970 |
| Tel: |
86-020-87833698 |
| Fax: |
86-020-87833698 |
| E-mail: |
|
|
|
|
Home
